1. ENTERING THE REMOTE FAX NUMBERS
Entering into Phone Book
If you register remote FAX numbers into the phone book in advance, you can specify them in a single
1
touch at transmission and reception. You can enter the following items into the phone book.
• ID number -------------------- Enter a number within the range from 001 to 400. This number can be used
2
• Name of remote FAX ------ Enter a name comprising up to 20 letters.
3
• TEL Number of remote FAX ------- Enter the TEL (FAX) number (max. 128 digits) of the remote FAX.
• 2nd TEL Number ------------ The call is routed to the sub number (max. 128 digits) when the main line is
4
• SUB/SEP/PWD -------------- SUB/SEP and PWD can be registered to each remote FAX you are enter-
5
• Quality TX --------------------- Set whether or not to specify Quality TX to each of the remote FAX numbers
• Transmission type ----------- Choose from memory TX and direct TX for each remote FAX.
6
• ECM ---------------------------- Set whether or not to specify ECM to each of the remote FAX numbers you
• Line ----------------------------- Set the line to be used for transmission to each remote FAX you are enter-
7
• Transmission attenuator --- Set the transmission attenuator for each remote FAX.
8
1
Press the SETTINGS key to display the settings
9
menu, then the
10
11
12
5-2
ENTERING AND SETTING ITEMS
to find a remote FAX number by ID number.
Note, however, that only the leading 12 letters can be displayed in the phone
book screen.
busy.
ing.
SUB/SEP/PWD
Page 5-4
you are entering.
are entering. ECM communication
ing (with the FAX board attached).
* For details on setting, consult your nearest Toshiba Service Station.
TELEPHONE NUMBERS
Page 2-9
key.