Control Panel - Toshiba E-STUDIO45 Operator's Manual

1. DESCRIPTION OF THE DIGITAL COPIER AND THE OPTIONAL EQUIPMENT (Cont.)

Control Panel

Touch panel
1
Displays the copier conditions, operating procedures, and various instructions and information to the
user in text and graphics.
PRINTER/NETWORK key
If you have an optional printer installed, press this key to access the printer function.
2
DATA LED/ERROR LED
DATA LED lights when the copier received the data. ERROR LED lights when communication error occurs.
COPY key
Press this key to select the copy function.
FAX key
3
Press this key to select the fax function.
MEMORY RX LED
This LED lights when memory contains a received original standing by to be printed.
MAIN POWER LED
4
This LED shows the AC power supply status. When the copier is ready to be used or in the energy
saving mode, it is green. It becomes red in the sleep mode.
POWER key
When you are not going to use the copier (including facsimile functions) for a while, press this key for
5
two seconds; all indicator lamps except the MAIN POWER LED and the touch panel are turned off and
unnecessary electricity is cut off in the shutoff mode. To resume using the FAX, press the key again.
After a while, the copier will become ready for copying. You can now switch it to the FAX mode. (If you
press this key, the power supply to the FAX reception detection circuit is not cut off, which allows
automatic return of the copier when it receives FAX data.)
6
7
8
9
10
• When Using the Weekly Timer
If the FAX document is automatically received when the weekly timer is used, the
11
copier automatically warms itself up and outputs the document, then returns itself
into the sleep mode.
* If you want to turn the main power switch OFF while the copier is in the sleep mode,
make sure that the MEMORY LED is lit off. When the MEMORY LED is lit, wait for all
the received originals to be output, then turn the main power switch OFF.
12
1-4
DESCRIPTION OF THE DIGITAL COPIER
Operator's Manual for Copying Functions