Trac[1|2|3|4]:Mark[?] - Keysight M8195A User Manual

6.21.23 :TRAC[1|2|3|4]:MARK[?]

Command
Long
Parameters
Parameter Suffix
Description
Example
Keysight M8195A Revision 2 – Arbitrary Waveform Generator User's Guide
:TRAC[1|2|3|4]:MARK[?]
:TRACe[1|2|3|4]:MARKer[?]
OFF | ON | 0 | 1
None
Use this command to enable or disable markers for the selected segment. The query
form gets the current marker state.
The command has only effect, If the channel is sourced from Extended Memory. In
this case the same value is used for all other channels sourced from Extended
Memory.
Command
:TRAC:MARK 1
Query
:TRAC:MARK?
General Programming 6
259