Output[1|2|3|4]:Filter:frate[:Value][?]; Output[1|2|3|4]:Filter:frate:type[?] Lowpass|Zoh|User - Keysight M8195A User Manual

6 General Programming
Value
< 0
0
> 0
6.13.7

:OUTPut[1|2|3|4]:FILTer:FRATe[:VALue][?]

Command
Long
Parameters
Parameter Suffix
Description
Example
6.13.8

:OUTPut[1|2|3|4]:FILTer:FRATe:TYPE[?] LOWPass|ZOH|USER

Command
Long
Parameters
Parameter Suffix
210
Table 32: Differential offset
Normal Output
Offset decreased
No offset
Offset increased
Due to the use of DAC values, the granularity is 1.
:OUTP:FILT:FRAT[?]
:OUTPut:FILTer:FRATe[?]
<value0>, <value1>...<value15> |<block>
None
Set or get the FIR filter coefficients for a channel to be used when the Sample Rate
Divider for the Extended Memory is 1. The number of coefficients is 16 and the values
are doubles between -2 and 2. They can be given as a list of comma-separated
values or as IEEE binary block data of doubles.
The coefficients can only be set using this command, when the predefined FIR filter
type is set to USER.O
Query:
OUTP:FILT:FRAT?
:OUTP:FILT:FRAT:TYPE[?]
:OUTPut:FILTer:FRATe:TYPE[?]
LOWPass|ZOH|USER
None
Keysight M8195A Revision 2 – Arbitrary Waveform Generator User's Guide
Complement Output
Offset increased
Offset decreased