Trac[1|2|3|4]:Adv[?]; Trac[1|2|3|4]:Coun[?]<Count>|Minimum|Maximum - Keysight M8195A User Manual

6 General Programming

6.21.21 :TRAC[1|2|3|4]:ADV[?]

Command
Long
Parameters
Parameter Suffix
Description
Example
6.21.22 :TRAC[1|2|3|4]:COUN[?]<count>|MINimum|MAXimum
Command
Long
Parameters
Parameter Suffix
Description
Example
258
:TRAC[1|2|3|4]:ADV[?]
:TRACe[1|2|3|4]:ADVance[?]
AUTO | COND | REP | SING
None
Use this command or query to set or get the advancement mode for the selected
segment. The advancement mode is used, if the segment is played in arbitrary mode.
The command has only effect, If the channel is sourced from Extended Memory. In
this case the same value is used for all other channels sourced from Extended
Memory.
Command
:TRAC:ADV AUTO
Query
:TRAC:ADV?
:TRAC[1|2|3|4]:COUN[?]
:TRACe[1|2|3|4]:COUNt[?]
<count>|MINimum|MAXimum
None
Use this command or query to set or get the segment loop count for the selected
segment. The segment loop count is used, if the segment is played in arbitrary mode.
<count> – 1..4G-1: number of times the selected segment is repeated.
The command has only effect, If the channel is sourced from Extended Memory. In
this case the same value is used for all other channels sourced from Extended
Memory.
Command
:TRAC:COUN 1
Query
:TRAC:COUN?
Keysight M8195A Revision 2 – Arbitrary Waveform Generator User's Guide