Arm/Trigger Subsystem; Abort[1|2|3|4]; Arm[:Sequence][:Start][:Layer]:Mdelay[?] <Module_Delay>|Minimum|Maximum - Keysight M8195A User Manual

6 General Programming
6.8

:ARM/TRIGger Subsystem

6.8.1

:ABORt[1|2|3|4]

Command
Long
Parameters
Parameter Suffix
Description
Example
6.8.2 :ARM[:SEQuence][:STARt][:LAYer]:MDELay[?]
<module_delay>|MINimum|MAXimum
Command
Long
Parameters
Parameter Suffix
Description
Example
180
:ABOR[1|2|3|4]
:ABORt[1|2|3|4]
None
None
Stop signal generation on all channels. The channel suffix is ignored.
Command
:ABOR1
:ARM:MDEL[?]
:ARM[:SEQuence][STARt][:LAYer]:MDELay[?]
{<delay> | MINimum | MAXimum}
[s|ms|us|ns|ps]
Set or query the module delay settings (see section 1.5.3) . The unit is in seconds.
Command
:ARM:MDEL 1E-13
Query
:ARM:MDEL?
Keysight M8195A Revision 2 – Arbitrary Waveform Generator User's Guide