3Com NETBuilder II Installation Manual page 6

1-2 C 1: I
HAPTER NSTALLING THE
Table 1-1 Required Materials for Each Chassis
4-Slot Chassis
Shorter power cable (4-Slot bag)
a 4 plastic standoffs (4-Slot bag)
OR
b 3 plastic standoffs (4-Slot bag)
and 1 nylon screw (8-Slot bag)
Items for single-wide 8-Slot chassis only
F M D
LASH EMORY RIVE
For the NETBuilder II 4- or 8-Slot system:
Flash memory drive
Ribbon cable
NETBuilder II Flash Memory Drive Diagnostic diskette
This guide
Two bags of materials marked for 4-Slot or 8-Slot.
The dual-wide 8-Slot chassis uses parts from each bag.
Dual-Wide 8-Slot Chassis
Longer power cable (8-Slot bag)
a 4 plastic standoffs (4-Slot bag)
OR
b 3 plastic standoffs (4-Slot bag)
and 1 nylon screw (8-Slot bag)
Flash memory drive
Nylon screws (4)
Metal screws (2)
Power cable for 8-Slot chassis
Power cable for 4-Slot chassis
Single-Wide 8-Slot Chassis
Longer power cable (8-Slot bag)
2 metal screws (8-Slot bag)
4 nylon screws (8-Slot bag)
Adapter plate (8-Slot bag)
Standoffs (4)
Adapter plate
Ribbon cable with 3 connectors
Diagnostic diskette