Chapter 3: System Setup
Chapter 3: System Setup
Removing the Chassis Cover
Prior to removing the chassis cover, make sure the unit's power
CAUTION!
CAUTION!
CAUTION!
is off and disconnected from the power sources to prevent
electric shock or system damage.
1. The screws on the sides and the rear are used to secure the cover to the
chassis. Remove these screws and put them in a safe place for later use.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Right side
2. Once all the screws are removed, from the front, push the cover
forward to remove it.
21
Left side
Rear
NDiS 165 User Manual