Installing A So-Dimm - Nexcom NDiS 165 User Manual

Chapter 3: System Setup

Installing a SO-DIMM

1. With the top cover removed, locate the DIMM1 and DIMM2 slots, then
release the locks on slots.
2. Release the lock on the SO-DIMM slots.
Lock
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
3. Insert the module into the slot at an 90 degree angle. Apply firm even
pressure to each end of the module until it slips into the slot.
SO-DIMM
slots
4. While pushing the SO-DIMM into the position, the lock will close
automatically.
22
NDiS 165 User Manual