Chapter 3: System Setup; Removing The Chassis Cover - Nexcom NDiS B322 User Manual

Chapter 3: System Setup

Chapter 3: System Setup

Removing the Chassis Cover

Prior to removing the chassis cover, make sure the unit's power is
off and disconnected from the power source to prevent electric
CAUTION! CAUTION!
CAUTION!
shock or system damage.
1. The screws on the bottom of cover are used to secure the cover to the
chassis. Remove these screws and put them in a safe place for later use.
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
5
NDiS B322 User Manual