Related Manuals for Nexcom NDiS 111
Summary of Contents for Nexcom NDiS 111
- Page 1 NEXCOM International Co., Ltd. Multi-Media Solutions Digital Signage Platform NDiS 111 User Manual NEXCOM International Co., Ltd. www.nexcom.com Published September 2011...
-
Page 2: Table Of Contents
Chapter 1: Product Introduction Exit .....................28 Overview ....................1 Key Features ..................1 System Specifications ................2 Mechanical Dimensions ................3 Chapter 2: Hardware Functionality Front Panel .....................4 Rear Panel ....................4 Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... -
Page 3: Preface
Any implied warranties of merchantability or fitness for any particular purpose is also disclaimed. Acknowledgements NDiS 111 is a trademark of NEXCOM International Co., Ltd. All other prod- uct names mentioned herein are registered trademarks of their respective owners. -
Page 4: Rohs Compliance
0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, NEXCOM has established an engineering and manufacturing task force in to implement the introduction of green products. The task force will ensure that we follow the standard... -
Page 5: Warranty And Rma
? Replace with 3rd party products if needed. the RMA number apply process. ? If RMA goods can not be repaired, NEXCOM will return it to the cus- tomer without any charge. ? Customers can send back the faulty products with or without acces- sories (manuals, cable, etc.) and any components from the card, such as... -
Page 6: Safety Information
There is a danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufactur- er. Discard used batteries according to the manufacturer’s instructions. Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... -
Page 7: Safety Precautions
11. All cautions and warnings on the equipment should be noted. 19. The computer is provided with CD drives that comply with the ap- propriate safety standards including IEC 60825. Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... -
Page 8: Technical Support And Assistance
Preface Technical Support and Assistance Conventions Used in this Manual 1. For the most updated information of NEXCOM products, visit NEX- Warning: Information about certain situations, which if not COM’s website at www.nexcom.com. observed, can cause personal injury. This will prevent injury to yourself when performing a task. -
Page 9: Global Service Contact Information
Z.I. des Amandiers, 17, Rue des entrepreneurs Tel: +44-1908-267121 78420 Carrières sur Seine, France Fax: +44-1908-262042 Tel: +33 (0)1 71 51 10 20 http://www.nexcom.eu Fax: +33 (0)1 71 51 10 21 http://www.nexcom.eu Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... - Page 10 Fax: +86-25-8315-3489 http://www.nexcom.cn China-Shenzhen Office Western Room 708, Block 210, Tairan Industry & Trading Place, Futian Area, Shenzhen, China 518040 TEL: +86-755-833 27203 FAX: +86-755-833 27213 http://www.nexcom.cn Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual...
-
Page 11: Package Contents
Preface Package Contents Before continuing, verify that the NDiS 111 package that you received is complete. Your NDiS 111 package should have all the items listed in the following table. Item Name 5044440197X00 RUBBER FOOT KANG YANG:RF9-3.5 601111A120X00 OUTSIDE CARTON FOR NDiS111 YI GIA... -
Page 12: Ordering Information
The following provides ordering information for NDiS 111 • NDiS 111 (P/N: 10W00011101X0) Intel® Atom™ E620 600 MHz CPU onboard Intel® EG20T PCH Intel® Integrated Graphic Engine Fanless System Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... -
Page 13: Chapter 1: Product Introduction
Gigabit Ethernet Controller • NDiS 111 is enclosed in a compact chassis and can be easily integrated to display devices, such as LCD TV or PDP at site installation with DVI • RTL8211CL External RGMII GbE PHY display, Giga LAN, TV tuner and WLAN support. -
Page 14: System Specifications
• 1 x RJ45 with LEDs for 10/100/1000Mbps Ethernet • 1 x Audio-out • 1 x antenna hole for Wi-Fi or TV tuner Storage • One 2.5” HDD drive bay Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... -
Page 15: Mechanical Dimensions
Chapter 1: Product Introduction Mechanical Dimensions Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... -
Page 16: Chapter 2: Hardware Functionality
Chapter 2: Hardware Functionality 2: h haPter ardware unCtIonalIty Front Panel Rear Panel POWER LED POWER SWITCH LINE IN DVI-D DC IN Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... -
Page 17: Chapter 3: System Setup
1. The screws on the bottom of cover are used to secure the cover to the chassis. Remove these screws and put them in a safe place for later use. Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... -
Page 18: Installing A Wireless Lan Module
2. Locate for the Mini PCI Express slot on the board. 1. Unmonut screws and remove HDD bay. Then put them in a safe place for later use Mini PCI Express slot Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... - Page 19 4. Push the module down then secure it with mounting screws. degrees angle until the gold-plated connector on the edge of the module completely disappears inside the slot Mounting Screw Wireless Mini PCI Express Module Slot Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual...
- Page 20 Now mount the WiFi antenna jack to the WiFi antenna hole located at the rear panel of the chassis then tighten the rings. Ring2 Ring1 RF Cable RF cable attached to the module Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual...
- Page 21 7. The photo below shows the WiFi antenna jack attached at the rear 8. Now connect an external antenna to the WiFi antenna jack and place panel of the chassis. HDD Bay with mounting screw. Antenna Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual...
-
Page 22: Installing A Tv Tuner Module
2. Locate for the Mini PCI Express slot on the board. 1. Unmonut screws and remove HDD bay. Then put them in a safe place for later use. Mini PCI Express slot Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... - Page 23 Mounting Screw TV Tuner Mini PCI Module Express Slot Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual...
- Page 24 Now mount the WiFi antenna jack to the WiFi antenna hole located at the rear panel of the chassis then tighten the rings. Ring2 Ring1 RF Cable RF cable attached to the module Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual...
- Page 25 7. The photo below shows theTV Tuner antenna jack attached at the rear 8. Now connect an external antenna to the TV Tuner antenna jack and panel of the chassis. place HDD Bay with mounting screw. Antenna Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual...
-
Page 26: Installing A Sata Hard Drive
1. The Hard Disk Drive bay included in the system is used to hold a SATA on the drive bracket. hard drive. SATA Hard Disk Hard Drive Drive Bay Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... - Page 27 4. Connect the SATA data cable and SATA power cable to the SATA drive. the SATA Drive with the provided mounting screw. SATA Power Connector SATA Data Cable SATA Power Cable Mounting Screw SATA Data Connector Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual...
-
Page 28: Chapter 4: Bios Setup
This chapter describes how to use the BIOS setup program for NDiS 111. The settings made in the setup program affect how the computer per- The BIOS screens provided in this chapter are for reference only and may forms. -
Page 29: Default Configuration
When “u“ appears on the left of a particular field, it indicates that a submenu which contains additional options are available for that field. To display the submenu, move the highlight to that field and press <Enter>. Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... -
Page 30: Bios Setup Utility
[Tue 05/05/2011] System Date F2 Previous Values F3 Optimized Defaults Access Level Administrator F4 Save & Exit ESC Exit Version 2.10.1208. (C)Copyright 2010, American Megatrends, Inc. Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... -
Page 31: Advanced
This section is used to configure the Super IO device. H/W Monitor This section is used to configure the hardware monitoring events such as temperature, fan speed and voltages. Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... -
Page 32: Cpu Configuration
Version 2.10.1208. (C)Copyright 2010, American Megatrends, Inc. This field will provide the auto-detected CPU specifications and CPU func- This field is used to enable or disable the GPIO controller. tion settings. Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... - Page 33 This field is used to enable or disable the Wake On Lan Function. This field is used to enable or disable the Wake On Ring Function. Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual...
-
Page 34: Usb Configuration
This is a workaround for OSes without EHCI hand-off support. The EHCI ownership change should be claimed by EHCI driver. USB Transfer Time-Out The time-out value for control, bulk, and Interrupt transfers. Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... -
Page 35: Super Io Configuration
Auto Option: Access SD device in DMA mode if controller supports it, otherwise in PIO mode. DMA Options: Access SD device in DMA mode. PIO Option: Access SD device in PIO mode. Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... -
Page 36: Pc Health Status
North Bridge Chipset Configuration This field is used to configure North Bridge Parameters. South Bridge Chipset Configuration This field is used to configure South Bridge Parameters. Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... -
Page 37: North Bridge Configuration
Show safe to turn off message when powering off an ACPI OS. High Precision Timer This field is used to enable or disable the High Precision Timer. Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... -
Page 38: Boot
Has no effect for BBS boot options.. Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0XFFFF) means indfinite waiting. Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... -
Page 39: Security
3. Press <Enter> to confirm the new password. 4. When the Password Installed dialog box appears, select OK. To change the password, repeat the same steps above. Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual... -
Page 40: Exit
ESC Exit Version 2.10.1208. (C)Copyright 2010, American Megatrends, Inc. Load Optimal Defaults Loads the optimal default values from the BIOS ROM. Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. NDiS 111 User Manual...
Need help?
Do you have a question about the NDiS 111 and is the answer not in the manual?
Questions and answers