Chapter 3: System Setup; Removing The Chassis Cover - Nexcom NDiS M335 User Manual

Chapter 3: System Setup

C 3: s
haPter ystem

Removing the Chassis Cover

Prior to removing the chassis cover, make sure the unit's power
CAUTION! CAUTION!
CAUTION! is off and disconnected from the power sources to prevent
electric shock or system damage.
1. The screws on the back and sides are used to secure the cover to the
chassis. Remove these screws and put them in a safe place for later use.
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
20
NDiS M335 User Manual