Chapter 3: System Setup; Removing The Chassis Cover - Nexcom NDiS M324 User Manual

Chapter 3: System Setup

Chapter 3: System Setup

Removing the Chassis Cover

Prior to removing the chassis cover, make sure the unit's power
CAUTION! CAUTION!
CAUTION! is off and disconnected from the power sources to prevent
electric shock or system damage.
1. The screws on the back are used to secure the cover to the chassis.
Remove these screws and put them in a safe place for later use.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
20
NDiS M324 User Manual