Advanced - Nexcom NDiS 165 User Manual

Chapter 4: BIOS Setup

Advanced

The Advanced menu allows you to configure your system for basic operation.
Some entries are defaults required by the system board, while others, if
enabled, will improve the performance of your system or let you set some
features according to your preference.
Setting incorrect field values may cause the system to
malfunction.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Security
RTC Wake Settings
ACPI Settings
CPU Configuration
South Bridge
IDE Configuration
USB Configuration
NCT6106D Super IO Configuration
NCT6106D HW Monitor
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Save & Exit
Enable system to wake using
RTC alarm
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
RTC Wake Settings
This section is used to configure RTC Wake settings.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main
Advanced Chipset
Wake system with Fixed Time
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Wake System with Fixed Time
Enables or disables system wake on alarm event. When enabled, system will
wake on the hr::min::sec specified.
48
Exit
PCIPnP Security
[Disabled]
Enable or disable System
wake on alarm event. When
enabled, System will wake on the
hr::min::sec specified
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NDiS 165 User Manual