Table of Contents
Advertisement
Menu 1: Trip meter 1 (TRIP 1)
The trip meter counts and displays the partial distance
covered by the motorcycle with the set unit of
measurement (km or mi) and is used as a basis to
calculate average fuel consumption, average speed
and trip time.
The TRIP1 number (in km or miles) is displayed with
the message TRIP1 and the indication of the unit of
measurement.
When the reading exceeds the maximum value of
9999.9 km or 9999.9 mi, distance travelled is reset
and the meter automatically starts counting from 0
again.
While the trip meter is displayed, press button (1) for
3 seconds to reset TRIP 1. When TRIP1 is reset, the
average fuel consumption, average speed and trip
time data are reset as well.
The TRIP1 counter is automatically reset in case the
system unit of measurement is changed manually:
the counter will then start back from zero, considering
the new units of measurement.
88
Advertisement
Table of Contents
