Tyre Set-Up
If owners install different tyres than original
equipment ones and yet belonging to the classes
specified by Ducati, this function allows them to
recalibrate the system. It also allows system correct
recalibration of all controls (such as DTC DWC EBC)
in case the owner changed front and rear sprocket
ratio, so that all motorcycle control systems can
consider these changes / variants and adapt their
processing parameters accordingly.
From the Setting Menu, it is possible to start the
teach-in procedure of the new rolling circumference
and new final drive ratio or restore the default
settings as established by Ducati for OEM outfit.
To do this, you must enter the Setting MENU.
Select TIRE SET-UP option, by pressing button (1) or
(2). Once function is highlighted, press CONFIRM
MENU button (4).
You open the TIRE SET-UP Menu.
1
2
4
Fig. 121
211