To access the main fuse, remove the left fairing (page
269).
The main fuse (C, Fig. 199), is located near the battery
on solenoid starter (D, Fig. 199). Remove the fuse cap
(E, Fig. 199)to reach it. A blown fuse can be identified
by breakage of the inner filament (F, Fig. 200).
Important
Switch the ignition key to OFF before replacing
the fuse to avoid possible short-circuits.
Warning
Never use a fuse with a rating other than
specified. Failure to observe this rule may damage
the electric system or even cause fire.
E
F
C
D
Fig. 199
F
Fig. 200
313