If engine is not started within 60 seconds since the
button was first pressed, the low and high beam
lights are turned OFF.
If the low beam or high beam was turned on before
starting the engine (with the procedure described
above), the headlight turns off automatically when
starting the engine and will turn ON again when the
engine has been completely started.
Turn indicators
Turn indicators are automatically reset by the
instrument panel.
After activating one of the two turn indicators, user
can reset them using the button (3, Fig. 129) on the
left switch.
If the turn indicator is not reset manually, the
instrument panel will automatically switch it off after
the motorcycle has travelled 500 m (0.3 miles) from
when the turn indicator was activated. The counter
for the distance travelled for automatic deactivation
is only activated at speeds below 80 km/h (50 mph).
If the calculation of the distance for automatic
deactivation is activated and then the motorcycle
exceeds a speed of 80 km/h (50 mph), the calculation
will be interrupted and will restart when the speed
returns below the indicated threshold.
220