To save the new setting, hold button (4) for 3 seconds
while the message MEMORY is highlighted in
orange. If storage is successful, MEMORIZED will be
highlighted in green for 1 second, level number or
status will be refreshed (update is indicated in green)
and then EXIT will be highlighted in green.
To exit the menu and go back to previous page, select
EXIT and press button (4).
Note
When you enable or disable the ABS through
this function, i.e. toggling from disabled to enabled
system or vice-versa, the procedure for activating or
deactivating the ABS is carried out: the change of
status of the ABS control unit is not instantaneous, it
requires at least 6 seconds.
136
2
ABS
MEMORY
1
ABS
MEMORIZED
1
ABS
MEMORY
OFF
1
2
3
OFF
1
2
3
OFF
1
2
3
Fig. 59