To adjust the headlight beam, turn the four screws (1)
and (2) located at the front, on the right and left side
of the vehicle; in particular:
-
the two screws (1), located on the right and left
side of the vehicle allow you to adjust the beam
vertically,
-
the two screws (2), located on the right and left
side of the vehicle allow you to adjust the beam
horizontally.
Warning
The headlight might fog up if the motorcycle is
used under the rain or after washing. Switch
headlight on for a short time to dry up any
condensate.
2
1
2
1
Fig. 189
2
1
Fig. 190
285