Installation; Tools; Procedure - ADRF Epoch-III-P8024 User Manual

2.3 Installation

2.3.1 Tools

No special tools or equipments are needed to install the Epoch-III-
P8024/8030/8037NM.

2.3.2 Procedure

Six mounting holes are located on the wall-mounting bracket to attach it to the
wall. The wall bracket must be securely attached to sufficiently carry the
weight of the Epoch-III-P8024/8030/8037NM, which is bolted to the wall
bracket through the four aligned mounting holes.
The following steps should be followed while mounting the repeater:
Installation Procedure
① Take the Epoch-III-P8024/8030/8037NM out of the box
② Using the six anchor bolts, mount the bracket on the wall
③ Make sure the bracket is securely mounted
④ Slightly tilt the repeater and mount the repeater onto the wall as shown in
the picture. Hook the upper 2 guard screws first and then slide/push in
the lower 2 guard screws into the place.
⑤ Make sure the Epoch-III-P8024/8030/8037NM is securely placed onto the
wall bracket
⑥ Fasten the 8 bracket screws back properly
⑦ Inspect that everything is secure
* Rack Mount option is also available. Please contact ADRF for additional
information.
Advanced RF Technologies, Inc. Proprietary Document
Epoch-III-P8024/8030/8037NM
User Manual V1.6
Page 14 of 41