Switches & Indicators; Leds - ADRF Epoch-III-P8024 User Manual

Epoch-III-P8024/8030/8037NM
User Manual V1.6
2.2 Switches & Indicators

2.2.1 LEDs

Epoch-III-P8024/8030/8037NM has three LEDs on the front panel of the
repeater as shown below in Figure 4.
Figure 4 – Epoch-III-P8024/8030/8037NM Repeater LED View
POWER
If the LED is lit GREEN, it indicates that there is AC power to the repeater.
SOFT FAIL
If the LED is lit YELLOW, it indicates that there is a soft fail alarm in the
system. The detailed alarm information can be viewed via the local web GUI.
In the event of a soft fail alarm, the repeater will still function, but the alarm
needs to be addressed promptly.
HARD FAIL
If the LED is lit RED, it indicates that there is a hard fail alarm in the system.
The detailed alarm information can be viewed via the local web GUI. In the
event of a hard fail alarm, the repeater will not function and immediate
attention is required.
Advanced RF Technologies, Inc. Proprietary Document Page 12 of 41