YASKAWA A1000 Quick Start Manual page 12

2 Mechanical Installation

Forklift Lifting Instructions
1. Remove screws on both sides of the unit and remove the side panels. The screws will be needed in step 4.
2. Remove M10 bolts on both sides of the unit and remove all washers.
3. Remove screws on both sides of the unit and remove the front and rear panel.
4. Attach both side panels back to the unit with the screws.
5. Place forks carefully under the unit and lift slowly off the pallet.
6. Attach the front and the rear panel. Torque the screws to 1.3 Nm.
EN 12 YASKAWA Europe TOEP C710616 88A - AC Drive A1000 IP23/54 Floor Standing - Quick Start Guide