Kit Assembly - Valor StoneFire SFMK01 Installation Instructions Manual

KIT ASSEMBLY

1. Locate leg brackets to sides of engine and secure
with 4 #8 screws; locate and secure rear support.
2. Secure duct to leg framing using 2 screw holes lo-
cated through rear of leg.
3. Position shield on top of duct and secure with 2 #8
screws.
Note: Shield can be placed in two positions depen-
dant of what Stonefire mantel is being installed.
6
4. Locate and secure standoffs to rear corners of engine.
5. Place the insulation pad on top of the engine, cutting
around the pipe if installing a top vent.
6. Place engine into cavity and secure to framing.
7. Rest top cover onto legs and secure to framing.