Troubles And Solutions - Njoy PWAV-10001AK-AZ01B User Manual

This series is also designed for use with home electronics
equipment such as: television, refrigerator, telephone
equipment, DVD players, modems and data processing
equipment.
When using the voltage regulator with an Uninterruptible
Power Supply (UPS) connect the UPS to the output
receptacle of the Akin Series unit then connect it (the AVR)
to the wall outlet.
6

Troubles and solutions

Problem Possible Cause
Power switch
isn't ON. AC
Power LED is plug connection
not ON. failed. AC socket
without power or
power failure.
Circuit
The unit is
breaker is
overload.
"tripped".
12
Solutions
Check if the mains is normal.
Check if the power cord is
connected firmly.
Check if the connected
devices are connected to the
unit firmly.
Check if the unit is turned on.
Use the below table to solve
the minor problems
Remove some loads first.
Reset the circuit breaker by
pressing the button again.
Problem Possible Cause
The unit is
The unit is
turned off
over-heated. It's
automatically
internal pro-
and the Power
tected function.
LED is not lit.
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with
separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be
treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused
by inappropriate waste handling of this product.
The recycling of materials will help to conserve natural resources.
13
Solutions
Remove some loads and wait
until the unit cool down.
Then turn on the unit again.