Troubles And Solutions - Njoy Akin Series User Manual

with home electronics equipment such as: television,
refrigerator, telephone equipment, DVD players, modems
and data processing equipment.
When using the voltage regulator with an Uninterruptible
Power Supply (UPS) connect the UPS to the output
receptacle of the Akin Series unit then connect it (the AVR)
to the wall outlet.
6

Troubles and solutions

Problem
Power LED is
not ON.
Circuit
breaker is
"tripped".
10
Possible Cause
Power switch
isn't ON. AC
plug connection
failed. AC socket
without power or
power failure.
The unit is
overload.
Solutions
Check if the mains is normal.
Check if the power cord is
connected firmly.
Check if the connected
devices are connected to the
unit firmly.
Check if the unit is turned on.
Use the below table to solve
the minor problems
Remove some loads first.
Reset the circuit breaker by
pressing the button again.