Table of Contents
Advertisement
RD400PDL-2/PXL-2 User Guide
About this User Guide
This User Guide is divided into sections as follows:
RD400PDL-2/PXL-2 Receivers
This section details where to find and how to use
the various operating controls and features, etc.,
relevant to the RD400PDL-2/PXL-2 receivers.
As there are several RD400PDL-2/PXL-2 variants,
some of the features described in the Receivers
section may not be available. Refer to the product
label for features available.
Receiver Use
This section describes how to use the RD400PDL-
2/PXL-2 to locate, trace, pinpoint, measure
depth/current and find current direction
(RD400PDL-2 only).
FaultFinding (RD400PDL-2 only)
This section describes how to locate and pinpoint
faults to ground on cables or cable sheaths using
the Accessory A-Frame and RD400PDL-2
Receiver.
EMS Marker Location
This section describes how to locate EMS Markers
using the RD400PXL-2 EMS Receiver.
RD433HCTx-2 Transmitter
This section details where to find and how to use
the various operating controls and features, etc.,
of the RD433HCTx-2 Transmitter.
Transmitter Use
This section describes how to apply a signal to a
target line using the RD433HCTx-2 Transmitter
Hide quick links:
Advertisement
Table of Contents
