Related Manuals for Radiodetection RD5100 H2O+
Summary of Contents for Radiodetection RD5100 H2O+
- Page 1 RD5100 ™ Multifunction precision cable and pipe locator User Guide PART NO. 90/UG113INT/01...
-
Page 2: About This Guide
O+ locator operation manual, which https://support.radiodetection.com is available for download from www.radiodetection.com. From time to time Radiodetection may release new software to improve the performance or add new functionality to its products. By registering, users will Certificates of conformity for the RD5100H... - Page 3 RD5100H O+ locator Locator features Keypad. 22. Radio Mode icon. LCD with auto backlight. 23. Power Mode icon. Speaker. 24. CD Mode icon. Battery compartment. 25. Frequency / current / menu readout. (Optional Lithium-Ion battery pack). 26. Bluetooth status icon: Accessory connector.
-
Page 4: Transmitter Features
RD5100H O+Tx transmitter Transmitter features 17. Clamp icon: Indicates when a Keypad. signal clamp or other accessory is LCD. connected. Bluetooth module. 18. DC Power connected indicator. Removable accessory tray. 19. Induction mode indicator. Accessories. 20. A-Frame: Indicates when the Side support tab. -
Page 5: Before You Begin
This information may be asked for Enter the menu Switch Power off when contacting Radiodetection or your local representative for technical support. Scroll through locate frequencies Transmitters automatically show their software version on startup. - Page 6 Examples of using the menu, selecting options and Note that when browsing the locator menu, the keys act as left and right making changes: arrows. When browsing the transmitter menu, the keys act as left and right arrows. Locator compass enable or disable To navigate menus: The locator compass can be enable or disabled.
- Page 7 Locating pipes and cables the locator. This method provides the best signal on an individual line and enables the use of lower frequencies, which can be traced for longer distances. For more detailed descriptions of using the WARNING: Direct connection to live conductors is POTENTIALLY LETHAL. Direct locator and transmitter, and for detailed connections to live conductors should be attempted by fully qualified personnel only locate techniques, refer to the Operation...
-
Page 8: Using Accessories
The FlexiTrace has a maximum power rating of 1W. When using the FlexiTrace with a that signal conditions are too poor for reliable measurements. Radiodetection RD5100H O+Tx transmitter, the output limit must be set to 1W in the Current Direction (CD) MAX P menu and the output voltage limit set to LOW in the MAX V menu. -
Page 9: Bluetooth Wireless Connection
Bluetooth wireless connection Pairing to a transmitter To pair to a transmitter you require an RD5100H O+Tx transmitter. RD5100H O+ locators feature a Bluetooth wireless module, as standard, providing the ability to connect to the RD5100H O+Tx model transmitter with iLOC. Before you begin, you should switch off all nearby Bluetooth equipment as they may interfere with the locator and transmitter’s pairing process. -
Page 10: Care And Maintenance
NOTE: If any iLOC commands fail, move closer to the transmitter and repeat the location or at Radiodetection headquarters. For more information go to www. process. radiodetection.com or contact your local Radiodetection representative. -
Page 11: Software Upgrades
The locator and transmitter are designed so that they do not require regular recalibration. However, as with all safety equipment, it is recommended that they are serviced and calibrated at least once a year either at Radiodetection or an approved repair center. - Page 12 Radiodetection in the United States and/or other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, inc. and any use of such marks by Radiodetection is under license. Due to a policy of continued development, we reserve the right to alter or amend any published specification without notice.