Radiodetection RD400PDL-2 User Manual page 19

RD433HCTx-2
Lf
8k
33k
65k
User Hz
Radiodetection
Radiodetection Ltd. Radiodetection Corp.
Western Drive PO Box 623
Bristol BS14 0AZ, UK Ridgewood, NJ07451, USA
On/Off A-V-O
Line Select
Serial No.
Connect
01/MH1054L1ENG/2
1 2
RD433HCTx-2
Lf
8k
33k
65k
User Hz
Radiodetection
Radiodetection Ltd. Radiodetection Corp.
Western Drive PO Box 623
Bristol BS14 0AZ, UK Ridgewood, NJ07451, USA
On/Off
A-V-O
Line Select
Serial No.
Connect
01/MH1054L1ENG/2
3
Frequencies are:
Current Direction
Lf Low Frequency
8k 8kHz
33k 33kHz
65k 65kHz
User Hz User defined Frequency
FF Normal Normal FaultFind
FF Boost Boost FaultFind
Multi Multi-Frequency
RD400PDL-2/PXL-2 User Guide
FF Normal
FF Boost
Multi
Connect 24V
Connect 50V
Mode Up
Down
Fuse
FF Normal
FF Boost
Multi
Connect 24V
Connect 50V
Mode Up
Down
Fuse
4
Direct Connection and CD Clamp only.
Direct Connection and CD Clamp only.
Induction and Direct Connection.
Induction and Direct Connection.
Induction and Direct Connection.
Direct Connection only.
Direct Connection only.
Direct Connection only.
Direct Connection only.
RD433HCTX-2 Transmitter
On/Off (1)
Turns the Transmitter On and Off.
Arrows on the main label indicate the required
transmitter alignment for signal induction.
Batteries (2)
Continuous battery state is displayed on LCD
during use. Low battery is indicated by flashing
battery symbol on LCD and output signal pulses
before switching transmitter off.
Select (3)
Selects the required mode. In User Hz mode
pressing the Select key once will momentarily
display the frequency selected.
Mode (4)
Moves the mode flag to the required mode where
it will flash until the Select key is pressed causing
the flag to become solid and the Transmitter to
provide an output.