Adding An Event - ADInstruments AD5000 Manual

5.7
Procedures:
In current Test interface,
1.
Press【F1】 to activate cursor function move to target event.
2.Press 【 F5】 button to select"Next Page"tag( Please refer last section5.6
"Remove an Event").
3. Press【F3】 to add event.
Event addition may not operate successfully for too close to another event,user
could move cursor a bit away from near event and have another try.

Adding an Event

Target event
Caution
59
After operation ,this event will
appear in the event list sequence
will be rearranged.