Mounting - Honeywell Satellite XT 9602-0200 4-20 mA Operation Manual

10.5

Mounting

The Pyrolyzer Module XT is prepared for DIN-rail assembly. An appropriate mounting rail is
delivered with the instrument. Mount this rail to a flat surface with the appropriate
fasteners.
When the rail is mounted, follow the steps below:
1. Slide the Pyrolyzer Module XT onto the rail mounted to the wall, see Figure 4.
Figure 4
Figure 4
2. Slide the Extractive Module XT onto the rail at the front of the Pyrolyzer Module XT, see
Figure 5.
3. Slide the Satellite XT onto the rail at the front of the Pyrolyzer Module XT, as illustrated in
Figure 5.
4. Plug in male and female connector of Satellite XT and Extractive Module XT.
See also Section 9, Extractive Module XT Installation.
Figure 5
Figure 5
Satellite XT 4-20 mA Versions
1
1
2
MST Extractive
2
MST Extractive MST
Pyrolyzer Module XT - Section 10
4
esc
3
4
MST Satellite XT
esc
3
set
Satellite XT
set
10-3