Relay Wiring - Honeywell Satellite XT 9602-0200 4-20 mA Operation Manual

2.5

Relay Wiring

Instruments with relay option have an additional
6–wire shielded cable extending from the bottom
of the instrument. This cable has a length of 3
meters and is also permanently attached to the
instrument.
The 6-wire shielded cable is used for relay wiring
and provides a pair of connections for each of
the 3 internal relays for activation of visual or
audible external alarm devices.
Junction Box for instruments with Relay Option (1 node, R-Version)
! Note:
All wiring for the Satellite XT and its related equipment must be in compliance with
any local electrical and fire codes. The Satellite XT wiring must be kept away from
any high power lines. All shielding for the wiring must be connected together and
grounded at only one point in the system.
Satellite XT 4-20 mA Versions
Relay Contacts
1
1
2
2
3
3
S
165
120
P+ P+ P- P- N+ N+ N- N- S S
P+ P+ P- P- N+ N+ N- N- S S
180
Installation and Start-Up - Section 2
white Alarm 1 Relay
brown Alarm 1 Relay
green Alarm 2 Relay
yellow Alarm 2 Relay
grey Fault Relay
pink Fault Relay
shield cable shield
D D 1/A1 1/A1 2/A2 2/A2 3 F / 3 F /
D D 1/A1 1/A1 2/A2 2/A2 3 F / 3 F /
2-6