Honeywell Satellite XT 9602-0200 4-20 mA Operation Manual page 50

R E L A Y S
A L A RM D E L A Y
s e l e c t : 2
A L A R M D E L A Y
3 . 0 s e c .
p l e a s e e n t e r
R E L A Y S
F A U L T T R I GG E R
s e l e c t : 3
F A U L T T R I G G E R
F A U L T ON L Y
s e l e c t :
F A U L T T R I G G E R
F A U L T +WA R N I NG
s e l e c t :
F A U L T T R I G G E R
F A U L T + MA I N T
s e l e c t :
F A U L T T R I G G E R
A L L
s e l e c t :
Satellite XT 4-20 mA Versions
Used to define an alarm delay for concentration alarms.
Minimum value is 0, maximum setting is 99.9 seconds.
Default setting is 3.0 seconds.
o f 3
Actuate the <set> key to enter and show the actual
setting.
To change the value, use the cursor keys <left> or
<right> to reach the desired position.
Use the cursor keys <up> and <down> to select the
figures you wish to enter.
!
After the new value has been entered, actuate the <set>
key to confirm or <esc> to exit.
Allows the user to define, which fault conditions will acti-
vate the Fault Relay. Ex factory the setting is Fault Only.
Use the <set> key to enter.
o f 3
The instrument will show the actual setting.
Used to configure the Fault Relay to be activated in case
of a fault condition only.
Actuate the cursor keys <up> or <down> to change.
Actuate the <set> key to confirm or <esc> to exit.
1 o f 4
Used to configure the Fault Relay to be activated in case
of a fault or warning condition only.
Actuate the cursor keys <up> or <down> to change.
2 o f 4
Actuate the <set> key to confirm or <esc> to exit.
Used to configure the Fault Relay to be activated in case
of a fault or maintenance condition only.
Actuate the cursor keys <up> or <down> to change.
3 o f 4
Actuate the <set> key to confirm or <esc> to exit.
Used to configure the Fault Relay to be activated in case
of a fault, warning, or maintenance condition.
Actuate the cursor keys <up> or <down> to change.
4 o f 4
Actuate the <set> key to confirm or <esc> to exit.
Configuration - Section 6
Alarm Delay
<Actual Alarm Delay>
Fault Trigger
Fault Only
Fault + Warning
Fault + Maintenance
All
6-16