Details Of I/O Signals; Details Of Remote Input And Output Signals; Output Signals (Master Module To Inverter (Fr-A8Nce)) - Mitsubishi Electric FR-A8NCE Instruction Manual

7

DETAILS OF I/O SIGNALS

The following device No. are those for station 1.
For stations 2 and later, the device No. are different. (Refer to the master module manual for correspondence between the
device No. and station number)
7.1

Details of remote input and output signals

7.1.1

Output signals (master module to inverter (FR-A8NCE))

The output signals from the master module are indicated. (Input signals to inverter)
Device
No.
RY0 Forward rotation command
RY1 Reverse rotation command
Signal Description
• When "1" is set, a start command is
0: Stop command
input to the inverter.
1: Forward rotation start
When "1" is set in RY0 and RY1, a
stop command is input.
0: Stop command
• The signals are fixed. They cannot
1: Reverse rotation start
be changed using parameters.
DETAILS OF I/O SIGNALS
7
53