Wiring; Ethernet Cable Connection - Mitsubishi Electric FR-A8NCE Instruction Manual

3.4

Wiring

This section describes the cable wiring and precautions. For network configuration, cables, and hubs used for the wiring, refer
to page 16 and subsequent pages.
3.4.1

Ethernet cable connection

 Connecting the cable
(1) Turn OFF the inverter power supply.
(2) Remove the front cover.
(3) Check the direction of the Ethernet cable connector.
Insert the connector to the communication connector of
FR-A8NCE until it clicks.
 Disconnecting the cable
(1) Turn OFF the inverter power supply.
(2) Remove the front cover.
(3) Hold down the latch on the Ethernet cable connector, and
pull out the cable while holding the latch.
18
WIRING