Mitsubishi Electric FR-A8NCE Instruction Manual page 55

Device
No.
RY2 High-speed operation command (terminal RH function)
RY3 Middle-speed operation command (terminal RM function)
RY4 Low-speed operation command (terminal RL function)
RY5 Jog operation command (terminal JOG function)
RY6 Second function selection (terminal RT function)
RY7 Current input selection (terminal AU function)
Selection of automatic restart after instantaneous power failure
RY8
(terminal CS function)
RY9 Output stop (terminal MRS function)
RYA Start self-holding selection (terminal STOP function)
RYB Reset (RES terminal function)
54
DETAILS OF I/O SIGNALS
Signal

Description
• Functions assigned to terminals RH, RM, RL, JOG, RT, AU, CS,
MRS, STOP and RES are activated.
• Signal names are initial values. Using Pr.180 to Pr.189, you
can change input signal functions. Note that some of signals do
not accept a command from the network according to the
Pr.338 and Pr.339 settings. For example, RYB reset (terminal
RES function) cannot be controlled via network. Refer to the
Instruction Manual (Detailed) of the inverter for the details of
Pr.180 to Pr.189, Pr.338, and Pr.339.