Mitsubishi Electric FR-A8NCE Instruction Manual page 47

Device
No.

RY(n+3)B to
Reserved
RY(n+3)F

These signals are set in the initial values. Using Pr. 180 to Pr. 189, you can change input signal functions.
Refer to the Instruction Manual (Detailed) of the inverter for details of Pr. 180 to Pr. 189.

For the FR-F800 series, no function is assigned in the initial setting.

The signals are fixed. They cannot be changed using parameters.

These signals are set in the initial values. Using Pr. 190 to Pr. 196, you can change output signal functions.
Refer to the Instruction Manual (Detailed) of the inverter for details of Pr. 190 to Pr. 196.

Output signal can be assigned using Pr. 313 to Pr. 315.
The settings of Pr.313 to Pr.315 are the same as those of Pr.190 to Pr.196 (output terminal function selection).
Refer to the Instruction Manual (Detailed) of the inverter for details of Pr. 190 to Pr. 196.

"n" indicates a value determined according to the station number setting.

The signal is valid only for the FR-A800 series.
46
I/O SIGNAL LIST
Refer
Signal
page
—
Device
to
No.

RX(n+3)B Remote station ready
RX(n+3)C
to Reserved
RX(n+3)F
Refer
Signal to
page
57
—