Mitsubishi Electric FR-A8NCE Instruction Manual page 63

Device
Signal
No.
Fault record
RWr25
(energization time)
RWr26 First monitor value
Second monitor
RWr27
value
RWr28 Third monitor value
Fourth monitor
RWr29
value
RWr2A Fifth monitor value
RWr2B Sixth monitor value
Seventh monitor
RWr2C
value
Eighth monitor
RWr2D
value
RWr2E Ninth monitor value
RWr2F Tenth monitor value
RWr30 to
Monitor value
RWr7F

The signal is valid only for the FR-A800 series.
62
DETAILS OF I/O SIGNALS
Energization time of the faults history No. specified in RWw21 is stored.
When "1" is set in RY20, the monitored data specified by the monitor code RWw26 to RWw2F is
saved.
Output frequency, output current, and output voltage monitors are held at an inverter failure.
Fixed monitored data are saved regardless of the RY20 setting.
Output frequency, output current, and output voltage monitors are held at an inverter failure.
Description