Programming Examples - Mitsubishi Electric FR-A8NCE Instruction Manual

8

PROGRAMMING EXAMPLES

This chapter provides programming examples which control the inverter with sequence programs.
Item
Reading the inverter status
Setting the operation mode
Setting the operation commands
Setting the monitoring function
Reading a parameter value
Writing a parameter value
Setting the running frequency
(running speed)
Reading the fault records
Inverter reset
70
PROGRAMMING EXAMPLES
Reading the inverter status from the buffer memory of the master station
Selecting the Network operation mode
Commanding the forward rotation and middle speed signals
Monitoring the output frequency
Reading the value of Pr.7 Acceleration time
Setting "3.0 s" in Pr.7 Acceleration time
Setting to 50.00 Hz
Reading the inverter faults
Perform inverter reset at an inverter alarm occurrence.
Program example Refer to page
75
76
77
78
79
80
81
83
84