Lake Processing And Control - Lab.gruppen PLM 20K44 Operation Manual

6. Signal Flow and Lake® Processing

6.3. Lake Processing and Control

As outlined in section 2.2.3, this device integrates seamlessly into the Lake Processing environment, providing all
features, functionality and connectivity associated with all Lake Processors. The internal Lake Processing includes
programmable crossovers, EQ, dynamics and other functions, and can be fully controlled via the Lake Controller
software with a version number of 6.3 or later. Additionally, many functions can be controlled or accessed directly
via the front panel.
6.4. Modules and Frames
6.4.1. Overview
A Frame represents one physical Lake Processor device (e.g. PLM 12K44). A maximum of four Modules are
contained within each Frame; these are referred to as Module A, B, C and D. The number of Modules shown in a
Classic 1 Way (CL1-Way) Output Modules, providing a total of twelve Module outputs that can be routed to any of
the four power outputs.
Please refer to the Lake Controller Operation Manual for further information.
6.4.2. LoadLibrary™ and Fingerprints
limiter. Additionally, LoadLibrary loudspeaker types may also include data relating to the electrical characteristics of
a particular loudspeaker.
on (LoadSmart) to be performed on the PLM+.
speaker type is loaded, its Fingerprint load
30
PLM+ SERIES Operation Manual rev 3.0.1