SecEng SED-64 Installation & User Manual page 15

2.6
Function 12 - Mobile phone 1
The SED 62/64 can report events via SMS to 3 mobile
phones (see section 2.8) Note: we only recommend this
option for non-critical alarms or for secondary monitoring
purposes due to the nature of the SMS delivery service.
Enter the number of the first mobile phone to report to.
If left empty Mobile Phone Reporting is disabled.
Send 0000 to default
Function 13 - Mobile phone 2
Enter the number of the second mobile phone for the
SED 62/64 to report events to.
Leave this option blank if no second mobile is needed
Send 0000 to default
Function 14 - Mobile phone 3
Enter the number of the third mobile phone for the
SED 62/64 to report events to.
Leave this option blank if no third mobile is. Needed
Send 0000 to default
Function 15 - SMS System reporting
This function determines what SMS System Messages
are sent by the SED 62/64. SMS System messages
are AC Fail, Low Batt, GSM Test and Fail to
Communicate.
Option 1 = Sends All System Messages to Mobiles
Option 2 = Send all system Messages except GSM Test
Function 16 - SMS Zone reporting
Enable this function if you would like an SMS
message sent to the mobile phone number,1,2,3
if Zones 1- 4 are activated. See Section 2.9 for
changing the text of the SMS message.
Options:
Any phone number
Up to 18 digits
120406991992#
Example : *
Options:
Any phone number
Up to 18 digits
130406991993#
Example :
*
Options:
Any phone number
Up to 18 digits
140406991994#
Example : *
Options:
0 = Disable SMS Messages
1 = Enable Option 1
2 = Enable Option 2
Example :
Options:
0 = Disabled
1 = Enabled
Example :
Default = 0
150#
*
Default = 0
160#
*
15