Table of Contents
Advertisement
Information on the application of motors
7.3 Routing cables in a wet/moist environment
Minimum distance for a customer-specific environment
The minimum distance S between the intake/exit air openings and other adjacent
components must be maintained.
Shaft height
100
132
7.3
Routing cables in a wet/moist environment
NOTICE
If the motor is mounted in a humid environment, the power and signal cables must be
routed as shown in the following figure.
Figure 7-1
88
Distance S
30 mm
60 mm
Principle of cable routing in a wet/moist environment
1PM6/1PM4 Hollow-Shaft Motors for Main Spindle Drives
Configuration Manual, PPMS, 04/2008, 6SN1197-0AD23-0BP0
Advertisement
Table of Contents
