Service
27. Sensors and overheating thermostats
manual
Vacuum shutter and switch
Active on electric and gas heated dryers only
Function
The vacuum switch ensures the necessary airflow in the dryer.
Adjustment
The switch must click when the distance from the vacuum shutter plate to the body of the
dryer is approx. 7 mm.
If the distance is too big, the vacuum shutter might not close properly.
Vacuum shutter and shutter switch are located behind the back plate.
Fig. 1 The top screw A on the switch is used for adjusting the vacuum shutter distance
from the body of the dryer.
Error codes
The following error codes are related to this section.
E15, E16
Refer to Selecta Control Service Manual for more information.
1
487 03 29 41
A
27
487 03 29 41
9