40
Replacing electric heating element
1. Disconnect the power to the dryer.
2. Open front shutter, fig. 1.
3. Remove screws A from both sides of the
heating unit, fig.2.
4. Remove the 2 bars B and the heating
elements are now loose, fig. 2.
5. Check that the data stamps (kW and V) on
the side of the new and the old elements
correspond with each other , fig. 3.
Mark the cables. Carefully dismount the
cables making sure not to loosen the cable
terminals.
6. Mount the new heating element in the
opposite order as described above.
7. Remember to remount the earthing
conductors if they have been dismounted.
8. Carry out a function check (see section 11).
9. Let the dryer operate on a program with heat.
12
40. Heating system
1
2
A
3
Service
manual
B
487 03 29 41
487 03 29 41
487 03 29 41