Replacement Of Main Circuit Board - Electrolux T3900 Service Manual

Service
manual

Replacement of main circuit board

The main circuit board (Selecta Control) is not
serviceable. It must be replaced if it fails.
The main circuit board can be ordered as a
spare part.
The spare part consists of: Circuit board with
fuses in anti-static packing and instructions.
Follow the instructions when replacing the
main circuit board.
The new main circuit board (Selecta Control)
is pre-programmed with specific features and
may need to be "post-programmed" after
installation.
In order to start the programming, the
programming mode has to be entered, see the
following page.
Following settings must be
programmed:
• Reversing (Yes or No).
• Heating type (gas, electric or steam). 4.02
• Payment settings (No payment).
• Panel type (OPL).
• Program type (OPL RMC, Auto Stop). 4.05
Selecta Control Service Manual
Certain main circuit board parameters need
to be set after installation, according to the
characteristics of the dryer and the preferences
of the owner.
See Selecta Control Service Manual for further
details.
487 03 29 41
21. Controls
4.01
4.03
4.04
21
487 03 29 41 487 03 29 41 487 03 29 41 9