Service
27. Sensors and overheating thermostats
manual
Outlet air - Overheating thermostat
Electric, gas and steam heated dryers
Function
The outlet air overheating thermostat is located on the outlet pipe at the back of the dryer.
The overheating thermostat ensures that the dryer does not overheat during program
operation.
The thermostat opens automatically and has to be reset manually.
Resetting
1. Disconnect the power supply to the dryer.
2 Remove bottom back plate.
4. Fig. 1 The thermostat can now be reset manually by pressing the reset button A
on the thermostat.
Error code
The following error code is related to this section:
E08
Refer to Selecta Control Service Manual for more information.
1
487 03 29 41
A
27
7