Lint Filter Switch - Electrolux T3900 Service Manual

Service
manual
Lint filter switch, Sliding Door
Function
The lint filter switch ensures that the dryer will not operate when the filter door is open.
If the dryer does not operate with the lint filter door closed and locked, the lint filter switch
might need replacing.
Replacement
1. Disconnect the power supply to the dryer.
2. Fig. 1. Open the filter door.
3. Fig. 2. Unscrew the switch.
4. Connect wires to the new switch.
5. Mount the new switch.
6. Close the filter door.
Testing the lint filter switch
1. Connect the power supply to the dryer.
2. Start the dryer.
3. If the dryer does not start when the filter door is closed and the start button is pressed,
check that the filter door is activating the lever on the lint filter switch.
• If the filter switch fails/hangs (without disconnecting) and the filter door is opened,
false air is drawn in and this can cause vacuum error,
4. Confirm that the fan, drum and heat all stop when the filter door is opened during
operation.
1
487 03 29 41
29. Door switch and filter switch
error code
E15.
2
29
9