21
Warning!
High voltage behind the screen
Control locations
Tumble dryer with Sliding Door
Fig. 1 The user module is placed behind the panel.
The user module circuit board contains display, indicator lamps, a connector for the
user keypad, and electronics to communicate commands to the main circuit board
via a serial interface.
Fig. 2 The circuit board also contains a slide switch A for changing to programming
mode.
See Selecta Control Service Manual for programming the dryer.
Fig. 3 When replacing/repairing the circuit board or buttons, the protective screen
must be removed.
Note! Remember to mount protective screen after service.
Remember to disconnect the power!
1
4
21. Controls
2
3
A
Service
manual
487 03 29 41