Nexcom Peak 555A User Manual page 51

Peak 555A User's Guide
8 Bit I/O Recovery Time
The recovery time is the length of time, measured in CPU clocks, which
the system will delay after the completion of an input/output request. This
delay takes place because the CPU is operationg so much faster than the
input/output bus that the CPU must be delayed to allow for the completion
of the I/O. This itm allows you to detemine the recovery time allowed for
8 bit I/O. Choices are from NA, 1
16 Bit I/O Recovery Time
This item allows you to determine the recovery time allowed for 16 bit I/O.
Choices are NA, 1,2
Memory Hole At 15M-16M.
In order to improve performance, certain space in memory can be
reserved for ISA cards.. This memory must be mapped into the memory
space below 16 MB.
Enabled
Disabled
(Default)
CPU Warning Temperature
When the temperature is over the CPU warning temperature, then the
warning signal will come out.
Current CPU Temperature
This field displays the current CPU of system temperature.
Current CPU FAN1 Speed
These fields display the current speed of CPU fans.
Current Voltage
These fields display the current voltge of voltage.
BIOS Setup
(Default)
4 CPU clocks.
(Default), 3,
Memory hole supported.
Memory hole not supported
to 8 CPU clocks.
4- 21