Nexcom Peak 555A User Manual page 49

Peak 555A User's Guide
Fast EDO Lead Off
The item allows you to select the Fast EDO Lead Off or not to enhance
the performance. The Choice: Enabled, Disabled
Refresh RAS# Assertion
This item allows you to select the type of DRAM refresh clock delay.
4Clks
5Clks (Default)
Fast RAS To CAS Delay
This field lets you insert a timing delay to get a faster performance
between the Row Address Strobe (RAS) to Column Address Strobe
(CAS) strobe signals, used when DRAM is written to, read from, or
refreshed.
2
3 (Default)
DRAM Enhanced Paging
This item allows you to determine whether to keep the page open until a
page/row miss or use additional information to keep the DRAM page open
when host may be "right back".
The Choice: Enabled
Fast MA To RAS# Delay
This item allows you to select the DRAM Row Miss timing. Note: the
timing adjustments are independent of DLT timing adjustment.
1
2
BIOS Setup
The timing type.
The timing type.
The timing delay
The timing delay.
, Disabled.
(Default)
One clocks. (MA setup to RAS# assertion)
Two clocks (Default).
(Default).
4- 19